40G&100G OEO Repeater
The OEO optical amplification subsystem adopts the clock and data recovery (CDR) chip design with the highest performance and flexibility in the industry.
https://www.wdmlight.com/40G-100G-OEO-Repeater.html
The OEO optical amplification subsystem adopts the clock and data recovery
(CDR) chip design with the highest performance and flexibility in the industry.
It can perfectly realize the function of optical signal regeneration and
amplification, signal cleaning, and shaping with features of highly compact
structure, flexible configuration, and low power consumption.
Types of OEO Repeater
Features
1U rackmount and pluggable chassis. 4 function board slots are supported and
boards can be flexibly configured based on requirements.
4x100G OEO board has 4 QSFP48 or QSFP+ ports, compatible with 100G and 40G
network applications.
Support wavelength conversion and optical signal amplification.
The optical ports are at the front and power units are at the back, which can
ensure safe use.
Dual power hot backup: support double -48V, double 220V, or one -48V and one
220V power supply.
Simple structure, low power consumption, long lifespan, and low cost.
Easy maintenance and network management are optional.
Technical parameters
|
Function |
Description |
|
Dimension |
1U: 44 mm (H)×442 mm (W)×280 mm (D) |
|
Working wavelength range |
Multi-mode 850nm, single-mode 1260nm~1650nm, CWDM/DWDM |
|
Supported service types |
STM-1/4/6/16/64/256, FE/GE/10GE/40GE/100GE |
|
Service access capability |
Support the OEO (optical-electrical-optical) amplification of at most 16 routes' services under any protocols at the rate of 40G or 100G |
|
3R function |
Support 3R function: re-amplifying), re-timing, re-shaping |
|
ALS function |
Support laser automatic turn-off alarm function. The laser will automatically turn off the emission when it receives no light |
|
Network management |
Support multi-kinds of graphical interface network management, such as SNMP, Web |
|
Optical interface |
LC/UPC |
|
Working temperature range |
-10℃~60℃ |
|
Working humidity range |
5%~95% no condensation |
|
Storage temperature |
-40℃~85℃ |
|
Power supply |
AC: 90 ~ 260V or DC: -36 ~ -72 V (support 1+1 power input backup) |
|
Typical power consumption |
Full configuration<90W |
|
Heat dissipation |
Fan cooling |
|
MTBF |
＞100000 hours |
Related products
-
Contact UsFBT splitter is an optical splitter that uses the Fused Biconical Taper (FBT) technique for splitting optical power and/or splitting wavelengths.
-
Contact UsThe add-drop multiplexing passive wavelength division card is generally used in the intermediate nodes of chain or ring-type network
-
Mauris elit magna, aliquet
50.00$Add to cartFusce sagittis tellus eget ante gravida euismod. Mauris interdum, neque eu hendrerit aliquet, diam nisi fringilla nisi, at convallis ante velit sed erat. Vestibulum mollis lorem ut molestie pharetra. Sed pretium quam lacinia, placerat urna a, tincidunt massa. Mauris elit magna, aliquet blandit mauris eu
-
Contact UsCompensate power of signal light in the transmission link and amplify the optical signals of up to 48CH (100GHz channel interval) or 96CH (50GHz channel interval) at the C band at the same time.
-
Contact UsThe 5G fronthaul transmission passive WDM systemis mainly used to solve the problem of lack of optical cable resources in the optical fiber remote transmission between DU-AAU in C-RAN architecture.
Reviews
There are no reviews yet.