FSGJ30B Progressive type safety gear(Left side)
FSGJ30B Left Side Progressive Type Safety Gear
https://www.xizi-ec.com/FSGJ30B-Progressive-type-safety-gear-Left-side.html
Type：FSGJ30B
Rated load range(P+Q)(kg)：750~3200
Rated speed range(m/s)：0.25~2.5
Activation speed range(m/s)：0.32~3.23
Guide rail width(mm)：10、15.88、16
|
Lift mode |
Bottom beam mounting interface dimensions(mm) |
|||
|
A |
B |
C |
D |
|
|
Left Side lift |
33.5 |
118 |
71 |
4×M16 |
Related products
-
Contact UsThe reverse osmosis equipment passes the raw water through fine filters, granular activated carbon filters, compressed activated carbon filters, etc., and then pressurizes it through a pump, using a p
-
Contact UsBottle Volume: 1500ml
Bottle Type: CSD bottle
Suitable Equipment: Krones
Packing Method: Standard packing for export. -
Contact UsRotary kiln incineration systems are widely adopted in the international industrial waste treatment sector, holding an approximate market share of 85% in this field. They are also recommended by China’s Ministry of Science and Technology and the National Environmental Protection Agency as the preferred furnace type in the National Industrial Waste Treatment Technology Policy. These systems can simultaneously handle sludge, industrial waste and waste with high moisture content. Solid waste is conveyed into the rotary kiln where it undergoes moisture evaporation, volatilization, ignition, and complete combustion. Ash residue is discharged through an outlet at the kiln’s tail end, while the generated flue gas proceeds to a secondary combustion chamber. Here, it mixes with secondary combustion air to ensure thorough burning, leading to the safe and compliant discharge of exhaust gases. Key features of rotary kiln incinerators include their broad adaptability to various wastes, ease of operation and maintenance, and extended service life.
-
Contact UsFS-V-F240 series drip-proof valve is suitable for direct injection of lithium battery which can efficiently avoid liquid dropping and hanging.
-
Contact UsFSH-MIC high-precision fluid point-to-liquid/cleaning pump integrates the driver chip into the motor, no controller is needed, only external IO signal is needed to trigger, and the point/subassembly can be completed according to the specified program. The system design is flexible, convenient for system integration, and reduce cost.
Reviews
There are no reviews yet.