VMC 1266 CNC Vertical Milling Machine Center
The machine is suitable for heavy cutting and precision machining in the fields of automobile and locomotive parts production, automation parts, mold and die frames, aerospace, etc.
https://www.josencnc.com/VMC-1266-CNC-Vertical-Machining-Center.html
The machine is suitable for heavy cutting and precision machining in the fields of automobile and locomotive parts production, automation parts, mold and die frames, aerospace, etc. The three axes adopt high rigidity roller line rail with large span column, so that it has the heavy cutting rigidity and load bearing of hard rail machine, and at the same time has the high speed, high precision and long service life characteristics of line rail.
| ITEM | UNIT | DV-1266 | DV-1266B |
| Travel | |||
| X-axis travel | mm | 1200 | 1200 |
| Y-axis travel | mm | 620 | 620 |
| Z-axis travel | mm | 600 | 600 |
| Worktable size | |||
| Working table size (X*Y) | mm | 1300×600 | 1300×600 |
| Max.loading capacity of working table | kg | 1000 | 1000 |
| Table T-slot size (width * number of slots * spacing) | number | 18x5x100 | 18x5x100 |
| Spindle | |||
| Spindle speed | rpm | 10000 | 8000 |
| Spindle drive form | belt driven | belt driven | |
| Spindle power | kW | BT40:11/15 | BT50:15/18.5 |
| Spindle bore specification | BT40 | BT50 | |
| Distance from spindle to table surface | mm | BT40:125-725 | BT50:145-745 |
| Spindle feed | |||
| Rapid feed rate(X,Y,Z) | m/min | 36/36/36 | 36/36/36 |
| Cutting feed rate | mm/min | 10000 | 10000 |
| Tool magazine | |||
| Tool magazine capacity | cutter arm type 24 | cutter arm type 24 | |
| Tool diameter/adjacent tool space | mm | BT40:Φ80/Φ150 | BT50:Φ110/Φ200 |
| Max. Tool length | mm | 300 | 300 |
| Max. Tool weight | kg | BT40:8 | BT50:15 |
| Accuracy | |||
| Positioning accuracy | mm | ±0.005 | ±0.005 |
| Reproduction accuracy | mm | ±0.003 | ±0.003 |
| Others | |||
| Controller | 0i-MF/M80 | 0i-MF/M80 | |
| Air pressure demand | kg/cm2 | 6 | 6 |
| Power demand | kVA | 30 | 30 |
| Machine weight | T | 6.8 | 6.8 |
| Model | A | B | C | D | E | F | G | H | I | J | K | T-slot number |
| DV-1266 | 1300 | 600 | 100 | 100 | 100 | 100 | 100 | 18 | 31 | 13 | 30 | 5 |
| DV-1266B | 1300 | 600 | 100 | 100 | 100 | 100 | 100 | 18 | 31 | 13 | 30 | 5 |
 |
||||||||||||
| Model | A | C | D | E | F | G | H |
| DV-1166 | 2780 | 1450 | 2750 | 2865 | 2580 | 570 | 550 |
| DV-1166B | 2780 | 1450 | 2750 | 2865 | 2580 | 570 | 550 |
 |
|||||||
Related products
-
Contact UsOptimizing Cross Cut Saw MAXCUT F30 offers fully optimizing options for all industrial requirements. It is especially suitable for the wider timber processing.
-
Contact UsThis is multifunctional small pelletizing line. It is used to recycle various leftovers, such as PP, PE, HDPE, LDPE, PVC, etc. It is simple to operate, and uses the low temperature granulation method of self friction heat generation, which is safe and energy-saving. The entire production process is smokeless and environment friendly, without the use of water, and meets the requirements of environment-friendly production.
-
Contact UsThe reverse osmosis equipment passes the raw water through fine filters, granular activated carbon filters, compressed activated carbon filters, etc., and then pressurizes it through a pump, using a p
-
Contact UsRotary kiln incineration systems are widely adopted in the international industrial waste treatment sector, holding an approximate market share of 85% in this field. They are also recommended by China’s Ministry of Science and Technology and the National Environmental Protection Agency as the preferred furnace type in the National Industrial Waste Treatment Technology Policy. These systems can simultaneously handle sludge, industrial waste and waste with high moisture content. Solid waste is conveyed into the rotary kiln where it undergoes moisture evaporation, volatilization, ignition, and complete combustion. Ash residue is discharged through an outlet at the kiln’s tail end, while the generated flue gas proceeds to a secondary combustion chamber. Here, it mixes with secondary combustion air to ensure thorough burning, leading to the safe and compliant discharge of exhaust gases. Key features of rotary kiln incinerators include their broad adaptability to various wastes, ease of operation and maintenance, and extended service life.
-
Contact UsYear: 1996
Spinning production line
Mixed strip: GC15 barrel diameter 1000 * 1200mm, 1 head and 1 barrel, automatic barrel change
One stitch: GC14 cylinder diameter 1000 * 1200mm, 1 head and 1 barrel, with self leveling and automatic barrel changing
Two needles: GC14 cylinder diameter 700 * 1200mm, two heads and two barrels, automatic barrel changing
Three needles: GC14 cylinder diameter 600 * 1200mm, 4 heads, 2 barrels, automatic barrel change
According to your requirements, we can transform it into a suitable size for your production needs!
Reviews
There are no reviews yet.